EVAPORATIVE CONDENSER

Evaporative Condensers

Evaporative condenser Evaporative condenser is used in those cases in which the heat of the refrigerant, coming from a refrigeration system, can not be used. This excess heat is eliminated by evaporating the water. This cooling system is based on the same physical principle as the cooling towers. The main difference is that in a cooling tower the thermal exchange takes place in the filling and in the condenser in the tubular bundle through which Read more…

WHAT IS A COOLING TOWER

¿What is a cooling tower?

THEORY AND OPERATION OF EVAPORATIVE COOLING TOWERS The evaporative cooling towers exploit a simple and natural physical principle, the forced evaporation of a minimum amount of water reduces the temperature of the main water body. Therefore, the cooling towers represent the cooling system most used in civil and industrial applications today. The temperature of the wet bulb in the installation area is the minimum exit temperature that can theoretically be obtained from a tower of Read more…

RELLENO SPLASH GS

The technology of the filling in the cooling towers

The choice of the filling in the cooling towers: crucial factor. ¿What is the filling in a cooling tower? The filling in a cooling tower is the place where the exchange of heat betweeen water and air happens for the reduction of water temperature. The water in the cooling circut that reaches the tower transfers the excess temperature to the air circulating inside the cooling tower. The water enters the cooling tower at the top Read more…

Open circuit cooling towers

Open Circuit Cooling Towers – Theory & Operation

The evaporation cooling towers exploit a simple and natural physical principle, the forced evaporation of a minimum amount of water reduces the temperature of the main water body. Therefore, cooling towers represent the cooling system most used in civil and industrial applications today. The temperature of the wet bulb in the installation area is the minimum output temperature that can theoretically be obtained from a cooling tower. Also, unless the air is saturated, this value Read more…

Evaporative condenser and adiabatic gas cooler for a dairy in the Langhe region

MITA Group has paticipated in the renovation of the refrigeration system of a local dairy in Langhe. They have used two different solutions: a MCE evaporative condenser and an adiabatic gas cooler PAD G-C. Both were required by the leading project design company, the Telos Studio an their engineers Claudio Tarsitano and Alessandro Pasini.   THE CHALLENGE The intention was to make a change of scale in their business to provide products to the retail market Read more…

An industrial cooling tower installed for Coca-Cola in Kiev

MITA Group has installed a cooling tower for the multinational of the food and beverage sector, Coca-Cola. This is a PME-E series evaporative cooling tower for its beverage production plants in Kiev. All industrial cooling towers of MITA Group are made of fiberglass, therefore resistant to corrosion, which helps them to last effectively over time. In addition, maintenance is simplified thanks to its wide access. It also incorporates the MCS – MITA Control System that manages and Read more…

Adiabatic subcoolers installed in supermarkets

A frequent goal of innovation is to change to sustainable technologies without any deterioration in performance. This concept is also applicable to the new commercial refrigeration systems in which the series of subcoolers or adiabatic subcoolers Alchemist patented by MITA Group has been installed. This project was also shared by Arneg Spa, international leader in design, production and installation of complete equipment for the retail sector, by integrating Alchemist refrigerators into the refrigeration units of Read more…

Revamping of ArcelorMittal cooling tower in a record time

THE CHALLENGE Due to an increase in the production of its plant in Sagunto, the iron and steel company, ArcelorMittal decided to refurbish the old cooling tower with a revamping. It was a tower of a single concrete cell, measuring 15 x 19 meters. The lack of maintenance had deteriorated markedly over the years, so its revamping was considered a quite complex work. The rehabilitation of this concrete cooling tower was awarded to Moncobra, EPC Read more…

Revamping of refrigeration system of production processes at the Hero Spain plant

THE CHALLENGE Dissipate the excess heat from industrial processes, essential in production In the facilities of Hero España in Alcantarilla (Murcia), which occupy 42,000 m2, a wide variety of products are elaborated, ranging from baby food to jams and marmalades. This makes the factory have different production processes. As in any industrial process, the choice of a suitable system to dissipate the heat, is a key element in the success of the installation. The constant Read more…

Retroffitting the refrigeration system of an urban hotel

Energy services company Kaener, advised by Torraval Cooling, has undertaken the retrofit of the refrigeration system for a city centre hotel in Bilbao. The new system has had to comply with highly demanding safety, environmental sustainability and energy efficiency requirements. This prompted the decision to opt for an evaporative cooling tower as it has minimal energy consumption, makes less noise, takes up less space and a lower investment for the establishment. The installation works represented Read more…

We use cookies to make sure you can have the best experience on our site. If you continue to use this site we will assume that you are happy with it. KEEP READING

Los ajustes de cookies de esta web están configurados para "permitir cookies" y así ofrecerte la mejor experiencia de navegación posible. Si sigues utilizando esta web sin cambiar tus ajustes de cookies o haces clic en "Aceptar" estarás dando tu consentimiento a esto.

Cerrar