Open circuit cooling towers PMS Series

Process industry

HVAC

The PMS series is suggested for small size plants, all models are totally pre-assembled at our factory.

Technical data

  • Axial motor-fan with direct coupling, low installed power, low noise levels.
  • Tower body and tank entirely made of fibreglass, corrosion-free material.
  • Distribution system in PVC, PP or PE equipped with wide non-clogging PP spray nozzles.
  • Fill pack with different kinds of air/water channels, suitable for the use with different water types.
  • Capacity: from 18 to 860 KW (indicative capacity referring to a machine, thermal gradient 5°C).
For all basic models the following special versions are available:
  • ATT: for high temperature water, with max peaks of 80°C
  • N: for water containing low quantities of suspended solids
  • N-ATT: for high temperature water (with max peaks of 80°C containing low quantities of suspended solids.
  • GS: for water containing large quantities of suspended solid

The following accessories and/or construction variants are available for all models under request:

  • Resistencia eléctrica trifásica con un termostato de control
  • Three-phase heating element with control thermostat
  • Minimum level cut-out switch
  • Two-speed motor with graduated thermostat, automatic cascade control panel, or control system with frequency inverter
  • Manhole for easy inspection and access to the internal components

Request further information

In case you need further information about this product, do no hesitate to fill in the form below:

    This information will not be used for advertising purposes. We will only use your data to respond to your query.

    Service and customer care

    for cooling equipments

    Technical inspections

    Global inspection of refrigeration equipment for a good diagnosis.

    Cleaning and desinfectation

    To maintain hygienic sanitary safety of the cooling unit.

    Security in access

    Protections and platforms for safe work in cooling towers.

    Revamping & Retrofitting

    Consultants specialized in reforms and improvements in cooling towers with the aim of adapting them to the new working conditions.

    Preventive maintenance

    Preventive maintenance to obtain
    the original design performance of the refrigeration equipment.

    2023 © Copyright. Todos los derechos reservados

    Desarrollado por Posik Marketing Digital